Since Alexa for Car is becoming available on Dec. 5th, 2018, I thought I would throw some pictures up of my Alexa installation before it was productized. It was novel at the time. I used a Verizon LTE Jetpack for cellular connectivity. I simply feed the audio into the Auxillary port in the car and tether wirelessly to the LTE modem. This is far from a noteworth project, it’s just something I did for fun and proof of concept.

A few years ago I built my own generator. I cobbled it together with some parts I had laying around the house. I found a free lawnmower on craigslist and I used the engine from it as a power source for the generator. I coupled the engine to an automobile alternator and a power inverter. The result is a cheap AC power generator. It only produces a few hundred watts of power, but it’s enough to power lights or emergency equipment in the event of power failure. I did this project for fun, not as a replacement for a real backup power generator. Here are some pictures:
The generator
The generator
Wood coupler panel
Belt and pulleys

On this page I highlight how I built my metal casting furnace. It’s a propane furnace capable of melting metals at up to 1,300 degrees F (°F). There are 2 major assemblies: The furnace housing and the burner. The housing is composed of a combination of fireclay, sand and cement; equally mixed in thirds.